Jerald Anthony C. Esteban
Asst. ProfessorDAVAO DE ORO STATE COLLEGE, PHILIPPINES

Submitted
2026/07/17First Online
2026/09/29doi
10.18805/BKAP954Cite article - Axay Bhuker, Davender Singh, M.S. Puneeth Raj, V.S. Mor. (2026). Standardization of Seed Grading Sieve Sizes for Maximum Seed Recovery and Quality in Clusterbean ( Cyamopsis tetragonoloba ) and Dhaincha ( Sesbania aculeata ). Bhartiya Krishi Anusandhan Patrika. 41(3): 352–357. doi: 10.18805/BKAP954
Background: High quality seed is a basic requirement for achieving optimum crop establishment, productivity and economic returns. Seed processing plays a crucial role in improving seed quality by removing inert matter, broken seeds and other impurities, consequently enhancing physical purity, uniformity, germination and planting value. Seed grading is an essential operation for removing impurities and undersized seeds, which are generally associated with lower physiological quality and vigour and helps maximize the recovery of pure seed fractions while ensuring that the processed seed meets the prescribed quality standards. The continuous development and release of new crop varieties necessitates periodic standardization of grading sieves to accommodate difference in seed size and shape. Considerable variation in seed size has been observed among newly released and older varieties. Optimization of sieve dimensions can improve processing efficiency, enhance physical purity and reduce seed losses, thereby increasing the availability of quality seed to farmers.
Methods: Unprocessed seed lots of clusterbean varieties HG 365 and HG 2-20 and dhaincha variety DH 1 were procured from the breeder seed store of the Department of Seed Science and Technology. Seed samples were graded using a Sieve Shaker (Model SB5W). For clusterbean, sieves of 1.60, 1.70, 1.80, 1.90, 2.00, 2.10 and 2.20 mm (slotted) were used, whereas for dhaincha, sieves of 1.50, 1.60, 1.70, 1.80, 1.90, 2.00, 2.10 and 2.20 mm (slotted) were tested. A 250 g unprocessed seed sample was sieve for 3-5 minutes at a shaking frequency of 25-30 strokes per minute. Seeds retained on each sieve were collected separately and evaluated for seed recovery and quality parameters such as seed recovery (%), seed dimensions (length and breadth in mm), first count germination (%), final germination (%), physical purity (%), 1000 seed weight (g) and moisture content (%). The sieve that retained the maximum quantity of seeds with seed quality parameters (above IMSCS) was identified as the optimum sieve size for that particular variety.
Result: In clusterbean varieties HG 365 and HG 2-20, the 2.00 mm slotted sieve recorded maximum seed recovery of 97.26% and 90.34% with germination (76.67% and 81.33%) and physical purity (98.78% and 99.38%) respectively, above IMSCS standards. In dhaincha variety DH 1, the 1.50 mm slotted sieve recorded maximum seed recovery (89.02%) with germination (75.67%) and physical purity (98.17%) above IMSCS. Although smaller sieve sizes increased the seed recovery percentage but reduced seed quality, whereas larger sieves improved seed quality but lower seed recovery. The study concludes that 2.00 mm slotted sieve is most suitable for processing clusterbean varieties HG 365 and HG 2-20 and 1.50 mm slotted sieve is optimum for dhaincha variety DH 1. Using these variety specific sieve sizes can enhance seed processing efficiency, maximize seed recovery and improve the economics of seed production programmes.
Distinguished scholars and subject experts committed to editorial excellence, scientific integrity and rigorous peer review.
View Full Board