Indian Journal of Animal Research

Indian Journal of Animal Research cover
Volume 60 · Issue 10 · 2026/02/25

In vitro Biomechanical Testing of Polyurethane External Skeletal Fixator as a Novel Polymer in Fracture Treatment

Ünal Yavuz
Kerem Yener
Mehmet Salih Karadağ
Kübra DİKMEN İLGİNOĞLU
Mehmet Sıdık HURMA
Ali HAYAT
Mustafa ÖZEN
116 Views

Submitted

2025/12/06

First Online

2026/02/25

doi

10.18805/IJAR.BF-2095

Cite article - Ünal Yavuz, Kerem Yener, Mehmet Salih Karadağ, Kübra DİKMEN İLGİNOĞLU, Mehmet Sıdık HURMA, Ali HAYAT, Mustafa ÖZEN. (2026). In vitro Biomechanical Testing of Polyurethane External Skeletal Fixator as a Novel Polymer in Fracture Treatment. Indian Journal of Animal Research. 60(10): 1800–1807. doi: 10.18805/IJAR.BF-2095

Abstract

Background: To determine the temperature, time and biomechanical properties of free-form polyurethane external skeletal fixation (PUESF) and compare them with acrylic external skeletal fixation (ACESF).

Methods: Three different configurations (uniplanar, multiplanar and circular) (n=4 for each configuration) were subjected to compression and bending (n=24 PUESF, n=24 ACESF) and only the uniplanar configuration was subjected to pullout testing (n=4 PUESF, n=4 ACESF). The temperatures of the connecting bar and K-wire were recorded when creating the multiplanar and circular configurations. All the configurations were subjected to axial and bending tests and the uniplanar configuration was subjected to pullout tests.

Result: Regarding the connecting bar temperature and the temperature delivered to the K-wires, the PUESF group reached maximum temperatures of 75.7°C and 38.1°C at 3 minutes and the ACESF group reached maximum temperatures of 87.6°C and 60°C at 9 minutes, respectively (p<0.001). Under compression force, the PUESF group showed similar strength to the ACESF group in the uniplanar and circular configurations (p>0.05), while it showed less strength than the ACESF group in the multiplanar configuration (p<0.05). The PUESF group showed similar strength to the ACESF group in all three configurations under the bending force (p>0.05). The ACESF group showed approximately 2 times as much pullout strength as that of the PUESF group (p<0.05). Polyurethane showed acceptable mechanical performance compared to acrylic in several test configurations. Polyurethane can be used in clinical trials for free-form external skeletal fixations (ESFs).

References

  1. Aithal, H.P., Kinjavdekar, P. and Pawde, A.M. et al. (2019). Epoxy-pin external skeletal fixation for management of open bone fractures in calves and foals: A review of 32 cases. Vet. Comp. Orthop. Traumatol . 32(3): 257-268. doi: 10.1055/s-0039-1678736. Alexandre, N., Sim&otilde;es, G. And Lopes, A.M. et al . (2023). Biomechanical Basis of Bone Fracture and Fracture Osteosynthesis in Small Animals. In: Biomechanical Insights into Osteoporosis. [Barkaoui, A. (Ed)]. IntechOpen. pp. 1-46. Amsellem, P.M., Egger, E.L. and Wilson, D.L. (2010). Bending characteristics of polymethylmethacrylate columns, connecting bars of carbon fiber, titanium and stainless steel used in external skeletal fixation and an acrylic interface. Vet. Surg . 39(5): 631-637. doi: 10.1111/j.1532-950X.2009.00639.x. Arias, J.I., Beato, C. and Espinoza, A. (2015). Epoxy putty external skeletal fixation in a tibiotarsal fracture of a wild choroy parakeet. Arq. Bras. Med. Vet. Zootec . 67: 671-678. doi: 10.1590/1678-4162-7474. Banoriya, D., Purohit, R., Dwivedi, R.K. (2017). Advanced application of polymer based biomaterials. Mater. Today Proc . 4(2): 3534-3541. Deiss, R., Bali, M.S., Doherr, M., Spreng, D., Rytz, U. and Ferguson, S.J. (2013). In vitro biomechanical testing of a micro external skeletal fixator. Vet. Comp. Orthop. Traumatol . 26(5): 385-391. Fernando, P.L.N., Abeygunawardane, A., Wijesinghe, P.C.I., Dharmaratne, P. and Silva, P. (2021). An engineering review of external fixators. Med. Eng. Phys . 98 : 91-103. doi: 10.1016/j.medengphy.2021.11.002. Fukushima, H., Hashimoto, Y. and Yoshiya, S. et al . (2002). Conduction analysis of cement interface temperature in total knee arthroplasty. Kobe. J. Med. Sci . 48(1-2): 63-72. Kouassi, K.J.E., Cartiaux, O., Fonkou&eacute;, L., Detrembleur, C. and Cornu, O. (2020). Biomechanical study of a low-cost external fixator for diaphyseal fractures of long bones. J. Orthop. Surg. Res . 15: 1-8. doi: 10.1186/s13018-020-01777-5. Krishnakumar, S. and Senthilvelan, T. (2021). Polymer composites in dentistry and orthopedic applications: A review. Mater Today Proc. 46: 9707-9713. doi: 10.1016/j.ma tpr.2020.08.463. Leitch, B.J. and Worth, A.J. (2018). Mechanical testing of a steel-reinforced epoxy resin bar and clamp for external skeletal fixation of long-bone fractures in cats. N Z Vet J. 66(3): 144-153. doi: 10.1080/00480169.2018.1443406. Lewis, R.A., Lewis, D.D., Anderson, C.L. et al . (2016). Mechanics of supplemental drop wire and half-pin fixation elements in single ring circular external fixator constructs. Vet. Surg. 45(4): 471-479. doi: 10.1111/vsu.12467. Martinez, S.A., Arnoczky, S.P., Flo, G.L. and Brinker WO. (1997). Dissipation of heat during polymerization of acrylics used for external skeletal fixator connecting bars. Vet Surg . 26(4): 290-294. Montasell, X., Herndon, G., Szwec, D. and Beauchamp, G. (2019). The effect of transfixation pins on the biomechanical properties of angled acrylic connecting bars. CJVR . 83(1): 17-23. Orhan, I., Alan, A., Alan, E. and D&uuml;zler A. (2025). Structural and functional evaluation of achilles tendons in rabbits: A Biomechanical perspective. Indian J. Anim. Res . 59(10): 1635-1640. doi: 10.18805/IJAR.BF-1970 . Palmer, RH. (2012). External fixators and minimally invasive osteosynthesis in small animal veterinary medicine. Vet. Clin. North Am. Small Anim. Pract . 42(5): 913-934. doi: 10.1016/j.cvsm.2012.06.001. Roe, S.C. and Keo, T. (1997). Epoxy putty for free-form external skeletal fixators. Vet. Surg. 26(6): 472-477. Sellei, R.M., Kobbe, P. and Dadgar, A. et al . (2015). External fixation design evolution enhances biomechanical frame performance. Injury . 46 : S23-S26. doi: 10.1016/S0020-1383(15)30007-3. Singh, T., Kumar, A., Udehiya, R.K., Gill, K.K., Rai, T.S. and Mahajan, S.K. (2023). Outcome of open long bone fractures in dogs stabilized with linear external skeletal fixator. Indian J. Anim. Res . 57(1): 120-125. doi: 10.18805/IJAR.B-4262 . Staudte, K.L., Gibson, N.R., Read, R.A., Day, R. and Robertson, I.D. (2004). Evaluation of a metal acrylic repair product as a clamp for an external fixator. Vet. Comp. Orthop. Traumatol. 17(2): 97-103. Tyagi, S.K., Aithal, H.P. and Kinjavdekar, P. et al . (2015). In vitro biomechanical testing of different configurations of acrylic external skeletal fixator constructs. Vet. Comp. Orthop . Traumatol . 28(4): 227-233. doi: 10.3415/VCOT- 14-07-0102 Tyagi, S.K., Aithal, H.P. and Kinjavdekar, P. et al . (2014). Comparative evaluation of in vitro mechanical properties of different designs of epoxy-pin external skeletal fixation systems. Vet. Surg. 43(3): 355-360. doi: 10.1111/j.1532-950X.2013.12128.x Tyagi, S.K., Aithal, H.P., Kinjavdekar, P.K.P., Amarpal, A., Pawde, A.M. and Singh, J.S.J. (2014). Comparative biomechanical evaluation of acrylic-and epoxy-pin external skeletal fixation systems with two- and three-point fixation per segment under compressive loading. Adv. Anim. Vet. Sci. 2(4): 212-217. doi: 10.14737/journal.aavs/2014/ 2.4.212.217. Tyagi, S.K., Aithal, H.P., Kinjavdekar, P.A., Pawde, A.M. and Saxena, A.K. (2023). Acrylic and epoxy-pin external skeletal fixation systems for fracture management in dogs. Indian J. Anim. Res . 57(1): 58-65. doi: 10.18805/IJAR.B-4265 .
EDITORIAL BOARD

Guided by Experienced Academic Leadership

Distinguished scholars and subject experts committed to editorial excellence, scientific integrity and rigorous peer review.

View Full Board
Yashpal Singh Malik
Chief Editor

Yashpal Singh Malik

Deputy Director General (Agricultural Education)Indian Council of Agricultural Research, Headquarters, New Delhi , India

L.D. Singla
Associate chief editor

L.D. Singla

Professor and HeadAbhilashi University, Chachyot, Himachal Pradesh, India

Vilas G. Atkare
Editor

Vilas G. Atkare

DeanDr. Panjabrao Deshmukh Krishi Vidyapeeth, Akola, Krishi Nagar, Maharashtra, India

S. Maya
Editor

S. Maya

Associate Dean and Professor & HeadKerala Veterinary and Animal Sciences University, Mannuthy, Thrissur, Kerala, India