Agricultural Science Digest

Agricultural Science Digest cover
Volume 41 · Issue 1 · 2020/12/19

Study of the Hydraulic Performance Parameters of the Drip Irrigation System at Various Operating Pressures

Parth J. Kapupara
Hina M. Bhatu
Jay Gohel
139 Views

Submitted

2020/04/14

First Online

2020/12/19

doi

10.18805/ag.D-5192

Cite article - Parth J. Kapupara, Hina M. Bhatu, Jay Gohel. (2020). Study of the Hydraulic Performance Parameters of the Drip Irrigation System at Various Operating Pressures. Agricultural Science Digest. 41(1): 89–92. doi: 10.18805/ag.D-5192

Abstract

Background: Drip irrigation system is one of the best water application methods that have been used in the world among the other irrigation methods because of its upright and high uniformity and high-water use efficiency. Hydraulic performance evaluation is widely accepted for the evaluation of overall uniformity of a drip irrigation system.

Methods: In an experimental study carried out at School of Engineering, RK University, Rajkot; hydraulic performance evaluation parameters viz ., Pressure discharge relationship, Christiansen’s uniformity coefficient (CU), manufacturing coefficient of variation (CVm) and emission uniformity (EU) of non-pressure compensating emitters were calculated for 2 lph inline and 2 lph, 4 lph, 8 lph online emitter at various operating pressure of 0.8, 0.9, 1.0, 1.1 and 1.2 kg/cm 2 as per American Society of Agricultural and Biological Engineers (ASAE) standards.

Result: The study concluded that rated discharge of the emitter can be obtained at the operating pressure of 1.0 kg/cm 2 . Pressure discharge relationship revealed that discharge of the emitter upsurges as pressure rises. CU and EU were more than 95% for all the cases and they were maximum at 1.0 kg/cm 2 . CV m was less than 0.0200 for all the cases and it was minimum at 1.0 kg/cm 2 . Study concludes that all the parameter viz ., CU, EU and CV m were excellent and very good categories for all emitters as per American Society of Agricultural and Biological Engineers (ASAE) standards.

Acknowledgement

true

References

  1. Alizadeh, A. (2001). Principles and Practices of Trickle Irrigation. Ferdowsi University, Mashad, Iran. ASAE STANDARDS. (2005). EP405.1 FEB03. Design and Installation of Microirrigation Systems. ASAE, St. Joseph, Michigan. ASAE STANDARDS, (1996). 43rd ed. EP458. Field Evaluation of Microirrigation Systems. St. Joseph, Mich. ASAE: 756-761. El-Nemr, M.K. (2012). An interactive spreadsheet for drip irrigation system uniformity parameters evaluation. International Journal of Agriculture Sciences. 4(4): 216-220. IRYDA. Rules for the drafting of localized irrigation projects. Ministry of Agriculture, Fisheries and Feeding. Karmeli, D. (1977). Classification and flow regime analysis of drippers. Journal of Agricultural Engineering Research. 22: 165-173. Merriam, J.L., Keller, J. (1978). Farm irrigation system evaluation. A guide for management. UTAH State University. Logan, UTAH, USA. Wu, I.P., Gitlin, H.M. (1977). Drip irrigation efficiency and schedules. Transactions of the American Society of Agricultural Engineers. 26(1): 92-97.
EDITORIAL BOARD

Guided by Experienced Academic Leadership

Distinguished scholars and subject experts committed to editorial excellence, scientific integrity and rigorous peer review.

View Full Board
Arvind kumar
Chief Editor

Arvind kumar

Former Vice- ChancellorRani Lakshmi Bai Central Agricultural Uni., Jhansi, U.P., INDIA

R.G. Upadhyay
Associate chief editor

R.G. Upadhyay

ProfessorEx -Director Extension Education, VCSG, Uttarakhand University of Horticulture and Forestry, Pauri Garhwal (Uttarakhand) India

Bouderoua Kaddour
Editor

Bouderoua Kaddour

DirectorUniversity Abdelhamid ibn Badis of Mostaganem, Algeria.

G. Rama Rao
Editor

G. Rama Rao

DeanAcharya NG Ranga Agricultural University, India