Agricultural Science Digest

Agricultural Science Digest cover
Volume 46 · Issue 4 · 2025/02/24

Influence of Cultivation Methods and Crop Geometry on Yield Attributes of Cotton ( Gossypium hirsutum L.)

Anbarasi Murugesan
124 Views

Submitted

2022/04/22

First Online

2025/02/24

doi

10.18805/ag.D-5602

Cite article - Anbarasi Murugesan. (2025). Influence of Cultivation Methods and Crop Geometry on Yield Attributes of Cotton ( Gossypium hirsutum L.). Agricultural Science Digest. 46(4): 659–664. doi: 10.18805/ag.D-5602

Abstract

Background: The cost of labour in India is constantly rising, so mechanization in cotton production will be critical in keeping costs under control. There will also be an increase in production as a result of high density. Thus, an attempt has been made through this study to compare the impact of mechanization in cotton with high-density planting to conventional farming methods with high-density planting.

Methods: The experiment was laid out in a split-plot design and replicated thrice. The treatments comprised of two cultivation methods viz. , mechanized cultivation (M 1 ) and conventional cultivation (M 2 ), assigned in main plot and four spacings viz ., 45 cm x 15 cm (1,48,148 plants/ha) (S 1 ), 60 cm x 15 cm (1,11,111 plants/ha) (S 2 ), 75 cm x 15 cm (88,888 plants/ha) (S 3 ) and 75 cm x 30 cm (44,444 plants/ha) (S4) in the subplot.

Result: The results of this study revealed that cotton under mechanized cultivation with the closer spacing of 45 cm x 15 cm (M 1 S 1 ) recorded fewer yield-attributing parameters, but because of their high plant population per unit area, it recorded a higher seed cotton yield than the other treatment combinations.

Acknowledgement

true

References

  1. Baskar, P. (2014). Influence of crop geometry and drip fertigation on growth and yield of Bt cotton, Ph.D., Thesis, Tamil Nadu Agricultural University, Coimbatore, Tamil Nadu, India. Bhalerao, P.D., Gawande, P.P., Ghatol, P.U. and Patil, P.R. (2008). Performance of Bt cotton hybrids for various spacing under rainfed condition. Agric. Sci. Digest . 28(1): 54-56. Bhardwaj, P., Meena, R., and Choudhary, S. (2020). Influence of plant population on cotton yield under different cultivation systems. Journal of Agronomy. 58(2): 198-204. Briggs, R.E., Patterson, L.L. and Massey, G.D. (1967). Within and between row spacing of cotton. Arizona Annual Report, Univ. of Arizona Agric. Ext. Service, Arizona. pp. 6-7. Chandel, R., Dixit, A. and Manes, G.S. (2010). Comparative evaluation of tractor operated inclined plate planter and happy seeder for cotton sowing in standing stubble condition, J. Instn. Engrs . 91: 3-6. CPG, (2012). Crop production guide published by Directorate of agriculture, Chennai and Tamil Nadu Agricultural University, Coimbatore. Grieesha, G. (2003). Crop establishment studies to increase yield in irrigated cotton (cv. MCU 12), M.Sc., Thesis, Tamil Nadu Agricultural University, Coimbatore, Tamil Nadu, India. Grieesha, G. (2003). Effect of drip fertigation on cotton growth and yield. Agricultural Water Management . 62(2): 145-150. Kalaichelvi, K. (2009). Bt cotton response to plant geometry and fertilizer levels J. Cotton Res. Dev. 23(1): 96-99. Kalaichelvi, K. (2008). Effect of plant spacing and fertilizer levels on insect pests in Bt cotton hybrid, Indian J. Ent. 70(4): 356-359. Kerby, T.A., Cassman, K.G. and M. Keekey, M. (1990). Genotypes and plant densities for narrow-row cotton system. I. Height, nodes, earliness and location of yield, Crop Sci. 30(3): 645-649. Krishnaswamy, S., and Iruthayaraja, P. (1983). Spacing and plant density effects on fruiting points in cotton. Agricultural Science Digest . 3(4): 210-215. Kalaichelvi, S., Baskar, R. and Narayana, P. (2017). Effect of mechanized cultivation on cotton yield attributes. Agricultural Science Digest . 37(2): 88-92. Kalaichelvi, S. (2009). Influence of crop geometry and cultivation practices on yield attributes of cotton. Indian Journal of Agronomy . 54(3): 245-249. Kumar, R., Sharma, S. and Singh, P. (2019). Effect of plant density on boll size in cotton. Indian Journal of Agricultural Research . 53(4): 321-326. Kumar, R., Singh, P., and Meena, S. (2016). Effect of mechanized cultivation on boll retention in cotton. Agricultural Science Digest . 36(4): 245-250. Kumar, S., and Prasad, L. (2017). Effect of plant spacing on reproductive organ development in cotton. Agricultural Reviews . 39(2): 98-104. Majumdar, G. (2012). Mechanization of cotton production in India. CICR Technical Bulletin. pp. 1-22. Narayan, R., Sharma, K., and Patel, V. (2008). Influence of mechanized cultivation on nutrient uptake and light interception in cotton. Indian Journal of Agronomy . 53(2): 112-118. Narayana, P., Lakshman, S., and Nair, V. (2007). Impact of plant spacing on cotton growth and yield under different cultivation methods. Indian Journal of Agronomy. 52(1): 73-76. Narayana, E., Hema, K., Srinivasalu, K., Prasad, N.V.V.S.D. and Rao, N.H.P. (2008). Performance of Bt cotton hybrid (NCS-145 Bt) to varied spacing and fertilizer levels in vertisol under rainfed conditions, J. Indian Soc. Cotton Improv . 33: 33-36. Narayana, E., Hema, K., Srinivasulu, K., Prasad, N.V.V.S.D. and Rao, N.H.P. (2007). Agronomic evaluation of Gossipium hirsutum hybrids for varied spacings and nitrogen levels in vertisols under rainfed conditions, J. Cotton Res. Dev. 21(2): 197- 200. Narayanamoorthy, A. (2008). Economics of drip irrigated cotton: A synthesis of four case studies, Indian J. Agric. Econ . 563(3): 487-500. Nithya, C. and Chinnusamy. C. (2013). Evaluation of weed control efficacy and seed cotton yield in transgenic cotton. Indian J. Applied Res. 3(6): 10-12. Ogola, J. B., Mathews, C., and Nyabundi, J. (2006). Effect of plant density on boll development and yield in cotton. Journal of Crop Science . 42(2): 134-138. Prasad, J. and Majumdar, G. (1999).Present practices and future needs for mechanization of cotton picking in India, Agric. Engg. Today . 23(5 and 6): 1-20. Prasad, J., Kapur, T., Majumdar, G., Sandhar, N.S., Patil, P.G., Shukla, S.K., Jaiswal, B.N. and Patil, A.B. (2004). Technology and equipment for harvesting, cleaning and ginning of cotton. Technical Bulletin No. CIAE/2004/113. NATP on adoption and refinement of cotton picker and cleaning system, CIAE, Bhopal. Raskar, B.S. (2004). Effect of irrigation methods, fertilizer levels and green manuring on yield and nutrient balance in summer cotton. J. Cotton Res. Dev. 18(2): 180-83. Ramesh, K., Rao, S., and Mehta, N. (2018). Impact of mechanized cultivation on cotton yield efficiency. Journal of Agricultural Research . 72(3): 178-185. Rossi, J., Novick, G., Murray, J., Landivar, J., Zhang, S., Baxevanos, D., Mateos, A., Kerby, T., Hake, K. and Krieg, D. (2004). Ultra narrow row cotton: Global Perspective and Reduce Pesticide use Proceedings of the Technical Seminar of the 3 rd Plenary Meeting of the ICAC: How to improve yields, Mumbai, India, Nov. : 7-11. Sandhar, N.S. (1999). Present practices and future needs of mechanization of cotton picking/harvesting in India. Paper presented in Indo Uzbek Workshop on “Agricultural Research” held at CIAE, Bhopal Nov. 15-16. Sendouka, S., Bilalis, D. and Zannis, D. (1980). Influence of plant density on fruiting body retention in cotton. Journal of Agronomy Research . 22(3): 178-185. Sharma, D., Kumar, V., and Meena, R. (2017). Effect of crop geometry on boll formation in cotton. Indian Journal of Agricultural Research . 51(6): 447-452. Sharma, R., and Verma, K. (2015). Impact of plant spacing on fruit retention in high-density cotton planting. Legume Research . 38(2): 102-108. Sharma, R., Meena, S. and Verma, K. (2019). Impact of plant spacing on boll size under different cultivation methods. Indian Journal of Agricultural Research . 53(4): 378-383. Singh, H., Sharma, P. and Gupta, R. (2017). Impact of mechanization on cotton productivity. Agricultural Reviews . 39(4): 250- 258. Sowmiya, R. and Sakthivel, N. (2018). Effect of Planting Geometry on Growth and Yield of cotton, Madras Agric. J. 105(1-3): 30-32. Suresh, K.R. and Sakthivel, N. (2016). Impact of mechanized practices on crop growth in cotton. Legume Research . 39(4): 215-218. Suresh, K.C. and Ramachandra, C. (2019). Growth and yield of cotton as influenced by planting geometry and genotypes under high density planting system., Int. J. Curr. Microbiol. Appl. Sci . 8(5): 2073 -2077. Sureshkumar, K. (2014). Integrated weed management in hybrid brinjal, M.Sc., Thesis, Agricultural College and Research Institute, TNAU, Madurai, Tamil Nadu, India. Srinivasa, R.S., Reddy, K.R. and Prasad, P. (2020). Impact of crop geometry on yield and resource efficiency in cotton. Journal of Plant Sciences . 77(4): 310-317. Tajuddin, A. (2006). Design, development and testing of engine operated weeder, Agric. Engg. Today . 30(5 and 6): 25-29. USDA, (2016). United States Department of Agriculture, USDA’s 92nd Annual Agricultural outlook forum. Paper presented in Crystal Gateway Marriott Hotel, Arlington, Virginia, February 26: 1-16. Verma, S., Patel, D., Choudhary, A. (2020). Influence of plant density and mechanization on cotton yield. Bhartiya Krishi Anusandhan Patrika . 35(1): 112-118. Vaiyapuri, K. (2004). Studies on inter cropping unconventional green manures in irrigated hybrid cotton, Ph.D., Thesis. Tamil Nadu Agricultural University, Coimbatore, Tamil Nadu, India. Vories, E.D. and Glover, R.E. (2006). Comparison of growth and yield components of conventional and ultra- narrow row cotton, J. Cotton Sci. 10: 235-243. Yadav, D.S., Singh, P. and Sharma, R.K. (2014). Mechanization and its impact on cotton productivity. Journal of Agricultural Engineering . 51(2): 165-172.
EDITORIAL BOARD

Guided by Experienced Academic Leadership

Distinguished scholars and subject experts committed to editorial excellence, scientific integrity and rigorous peer review.

View Full Board
Arvind kumar
Chief Editor

Arvind kumar

Former Vice- ChancellorRani Lakshmi Bai Central Agricultural Uni., Jhansi, U.P., INDIA

R.G. Upadhyay
Associate chief editor

R.G. Upadhyay

ProfessorEx -Director Extension Education, VCSG, Uttarakhand University of Horticulture and Forestry, Pauri Garhwal (Uttarakhand) India

Bouderoua Kaddour
Editor

Bouderoua Kaddour

DirectorUniversity Abdelhamid ibn Badis of Mostaganem, Algeria.

G. Rama Rao
Editor

G. Rama Rao

DeanAcharya NG Ranga Agricultural University, India