Agricultural Science Digest

Agricultural Science Digest cover
Volume 46 · Issue 5 · 2026/07/29

Optimization of Blade Geometry and its Orientation based on Piercing Force for Debarking Jigat Trees

K.T. Jazal
P.R. Jayan
Sanchu Sukumaran
Vaisakh Venu
Hiba Fathima
M. Vasudevan
U. Princy
99 Views

Submitted

2026/02/20

First Online

2026/07/29

doi

10.18805/ag.D-6502

Cite article - K.T. Jazal, P.R. Jayan, Sanchu Sukumaran, Vaisakh Venu, Hiba Fathima, M. Vasudevan, U. Princy. (2026). Optimization of Blade Geometry and its Orientation based on Piercing Force for Debarking Jigat Trees. Agricultural Science Digest. 46(5): 919–926. doi: 10.18805/ag.D-6502

Abstract

Background: Jigat bark is a key important binding material in the agarbatti industry owing to its excellent adhesive property. However, owing to lack of mechanization, debarking is still mostly performed by manual operation, increasing human effort and decreasing the overall output. To support the design of a mechanized debarking machine, this study examined the effects of rake angle and blade thickness on piercing force, insertion depth and overall debarking efficiency.

Methods: The experiments were conducted with the help of piercing force setup, it consisting of an S-type load cell, chisel, bark gauge/steel ruler and digital indicator with four rake angles (30°, 40°, 50° and 90°) and three blade thicknesses (1, 2 and 3 mm).

Result: Two-way analysis of variance showed that the rake angle significantly influenced the piercing force [F (3,48) = 19.45, p = 2.16 x 10 -8 ] and insertion depth [F (3,48) = 74.95, p = 3.95 x 10 -18 ]. The blade thickness also significantly affected the piercing force [F (2,48) = 3.68, p = 0.0327] and insertion depth [F (2,48) = 4.60, p = 0.0149]. No significant interactions were detected during the evaluation, suggesting that both variables functioned independently. According to the regression analysis, observed that piercing force increased with blade thickness (c = 0.467, p = 0.015) and rake angle (b = 0.443, p = 0.039). The force-normalized insertion compliance (ç = D/F) declined as the thickness of the blade increased (c = -0.79, p = 0.013). Bark’s hardness was measured at 490 N, 50% compression and 5 mm penetration and its average moisture content was 58.4%. For practical debarking, a 2 mm blade was chosen because it was more durability and better suited for repeated impact, even though a 1 mm blade with a 40° rake angle needed less piercing force.

Acknowledgement

true

References

  1. Caceres, C.B., Uliana, L. and Hernández, R.E. (2018). Orthogonal cutting study of wood and knots of white spruce. Wood and Fiber Science . 50(1): 55-65. Dvoracek, O., Lechowicz, D., Haas, F. and Frybort, S. (2022). Cutting force analysis of oak for the development of a cutting force model. Wood Material Science and Engineering . 17(6): 771-782. Hernandez, W. (2006). Improving the response of a load cell by using optimal filtering. Sensors . 6(7): 697-711. IS: 1708 (part 10)-1986 Determination of Hardness Under Static Indentation. Jamaddar, S., Raposo, A., Sarkar, C., Roy, U.K., Araújo, I.M., Coutinho, H.D.M., Alkhoshaiban, A.S., Alturki, H.A., Saraiva, A., Carrascosa, C. and Islam, M.T. (2022). Ethnomedicinal uses, phytochemistry and therapeutic potentials of Litsea glutinosa (Lour.) C. B. Robinson: A literature based review. Pharmaceuticals ( Basel, Switzerland ). 16(1): 3. https://doi.org/10.3390/ph16010003. Jiang, S., Buck, D., Tang, Q., Guan, J., Wu, Z., Guo, X. and Wang, X. (2022). Cutting force and surface roughness during straight-tooth milling of Walnut wood. Forests . 13(12): 2126. Joo, J.W., Na, K.S. and Kang, D.I. (2002). Design and evaluation of a six-component load cell. Measurement . 32(2): 125-133. Kailashkumar, B., Sivakumar, S.S., Gunasekar, J.J., Padmanathan, P.K., Albert, V.A. and Ravikumar, R. (2023). Selection of a cutting mechanism and optimization of parameters for coconut harvesting drone. Agricultural Science Digest- A Research Journal . 43(3): 382-389. doi: 10.18805/ ag.D-5610 . Kirtikar, K.R. and Basu BD. (1999). Indian Medicinal Plants (Reprint Edn 2, Vol. III). International Book Distributors, Dehra Dun. pp. 2155-2156. Kulkarni, Y.A., Gokhale, S.B., Yele, S.U., Surana, S.J. and Tatiya, A.U. (2011). Pharmacognostical studies and preliminary phytochemical investigations on the bark of persea macrantha (Nees) kosterm (Lauraceae). Indian Journal of Natural Products and Resources . 2(2): 211-217. Laasasenaho, J., Melkas, T. and Alden, S. (2005). Modelling bark thickness of Picea abies with taper curves. Forest Ecology and Management . 206(1-3): 35-47. Praveena, S., Jithin, J. and Jose, P.A. (2023). Development of agrotechniques and restocking of Persea macrantha-a JIGAT yielding plant for sustainable utilisation. Journal of Tropical Forest Science . 35(3): 331-338. Ran, J., Hu, C., Zhang, F., Wang, X. and Li, P. (2022). Effect of micro-and macro-mechanical characteristics of jujube bark on jujube girdling quality. Agriculture . 12(2): 278. Xu, W., Wu, Z., Lu, W., Yu, Y., Wang, J., Zhu, Z. and Wang, X. (2022). Investigation on cutting power of wood-plastic composite using response surface methodology. Forests . 13(9): 1397. Yoko, S., Akinobu, M., Atsushi, Y. and Yoshinori, I. (2000). Water soluble poly saccharide from Litsea G. (Lauraceae). J. Chromatography . 881: 639-644.
EDITORIAL BOARD

Guided by Experienced Academic Leadership

Distinguished scholars and subject experts committed to editorial excellence, scientific integrity and rigorous peer review.

View Full Board
Arvind kumar
Chief Editor

Arvind kumar

Former Vice- ChancellorRani Lakshmi Bai Central Agricultural Uni., Jhansi, U.P., INDIA

R.G. Upadhyay
Associate chief editor

R.G. Upadhyay

ProfessorEx -Director Extension Education, VCSG, Uttarakhand University of Horticulture and Forestry, Pauri Garhwal (Uttarakhand) India

Bouderoua Kaddour
Editor

Bouderoua Kaddour

DirectorUniversity Abdelhamid ibn Badis of Mostaganem, Algeria.

G. Rama Rao
Editor

G. Rama Rao

DeanAcharya NG Ranga Agricultural University, India